|
Bull
This 8' h x 5' w x 16' long bull which, once bronzed will be shipped overseas to China.
|
|
|
|
Another example of an enlargement
|
|
|
|
Mother & baby Brachisaurs
These sculptures are 72 ft. long (50 ft. tall) for the mother and the baby is 25 ft. long. They were produced for a client down in the US and the final destination was for a children's museum.
|
|
|
|
Spartan
The life size sculpture of this Spartan with his full armament will ultimately be cast in bronze.
|
|
|
|
Our Savior
This sculpture of "Jesus" once bronzed will be placed in a garden in the USA.
|
|
|
|
Spirit - Big Bobcat
This larger than life size bobcat was produced for the University of Bozeman in Montana in October 2009. The University mascot - "Spirit" was gifted to them from the Montana State University Alumni Assocation.
|
|
|
|
Life Size Elk
This life size elk produced from the maquette (on top of the middle steel post) will be going to the foundry to be bronzed.
|
|
|
|
Colt and Mother
These two sculptures already have the clay on them. They where produced for a Canadian artist who will have them molded and then bronzed for her client.
|
|
|
|
Big Guy
This guy goes with the 5 ft. dog and was part of a 11 piece sculpture order that once bronzed will be place in Eastern Canada.
|
|
|
|
Larger Than Life
These four sculptures all 8' tall and larger are going for the bronzing process in the USA and then back up into Canada to their final place in Eastern Canada.
|
|
|
|
Big Birds
This turkey's are 2x life size and are going to be bronzed for a client down in the USA.
|
|
|
|
Birds of Prey
This 8 ft. wing span for this eagle will be beautiful once it is bronzed.
|
|
|
|
Globe
This 36" globe was for a client who is going to bronze it. The finished piece called " Cabin Fever" is just beautiful.
|
|
|
|
Shells
You're going to need a really big ocean for these shells. They are going to be bronzed for an artist down in Wyoming.
|
|
|
|
Bear
The marquette is sitting in the lap of this enlargement. It was scaled 10 times bigger for the end result.
|
|
|
|
Sheep
A local BC artist wanted this enlargement 8x his original.
|
|
|
|
Life Size Horse & Rider
This point-up was produced for a client in the USA and is shown here at the "Calgary Stampede" Art Show in 2009.
|
|
|
|
Big Moose
The artist had a great vision for this piece, and the final result must have worked because it won "Best Show" in the Calgary Stampede in 2008.
|
|
|
|
Lazy Bear
This life size bear made in a medium density foam was manufactured for an artist down in Montana.
|
|
|
|
Jasper and Friends
This donkey and friends are destined to a back yard as bronze sculpture.
|
|
|
|
Jasper and Friends
These 3 characters find their home at the "Lucky Three Ranch" in Loveland, CO.
|
|
|
|
Artist Enlargement
This bear was enlarged 3x from original for a local artist as a display piece and then later on as a bronze sculpture.
|
|
|
|
Elk
This 1 1/4 life size elk was done for a local artist. He is in the process of covering it in clay before taking it to the foundry to be casted.
|
|
|
|
Ribbons
These 2 ribbons are an artist sculpture to be bronzed. One is 5 ft. and the other 6 ft. tall.
|
|
|
|
Big Bears
These 2- 9 ft. dancing bears are located in Montana for a client.
|
|
|
|
Indoor Children's Playground
These indoor props where made for a children's indoor playground. From wood, to foam, to fabric, we can handle anything.
|
|
|
|
These are the finished panels in place and ready for the KIDS.
|
|
|
|
Really Big Catch
This 6 ft. tall fish was produced for the City of Pittsburgh as a teaching tool for school children and the public. It has a inside/outside coating on it and is very durable for the public use.
|
|
|
|
Dice
These 3 - 16" dice work great as tables, a seat to sit on around the campfire. They would also be wonderful if displayed for a business trade show prop or unique signage for a business.
|
|
|
|
Big Hammer
This 8 ft. tall Stiletto hammer was prodcued for a company in Alberta to take to all their trade shows that they attend all over Canada.
|
|
|
|
Head Mold
This sculpture was created for a mold, that then would be used for wig display - with a business card location on the front bottom.
|
|
|
|
BUZZ
This 2' long bee was made from high density foam and the hive was made from 1" MDF board.
This is one guy who will not be flying away anytime soon.
|
|
|
|
Dino Puzzle
Like doing puzzles??? These two guys take a least 2 people to put together as the wooden pieces are a bit challenging.
|
|
|
|
King Kong
Made in 2008 for GG, this guy will take anyone on.
|
|
|
|
Solid as a Rock
This rock with biblical text on it, is used as a teaching tool for teenagers in church classes.
|
|
|
|
That was Easy !!
"Easy Button" for Staples store that was expanded to 3 ft. across.
|
|
|
|
Health Bottles
These bottles where enlarged to 2 ft. and 5 ft. for trade show display. Customer wanted big, bright and noticeable. Original bottles are sitting on the top rim of the large ones.
|
|
|
|
Trade Show Display
Used in a health food industry - trade show. This 5 ft. bottle really grabbed the attention of the consumers walking the aisles.
|
|
|
|
9' Tall Medusa
Finished by our client, this "Show Stopper" went to the 2006 Comic-Con Convention in San Diego.
|
|
|
|
Jabba the Hutt
7' high and 14' long. This life size character from "Star Wars" was produced in conjunction with our client for the 2007 Comic-Con Show.
|
|
|
|
Robot
This robot is just too cool!!!!
|
|
|
|
R2D2
Milled by ATBC and finished by our client this little R2D2 unit was produced for "LucasFilms".
|
|
|
|
Hockey Player
This life size replica of a famous hockey player was produced for a client who wanted to promote their new toy line of the figure.
|
|
|
|
RE/MAX Balloon
Local broker wanted more recognition on busy highway for his secondary location. This 10 ft. balloon does do the trick.
|
|
|
|
Hitachi Rotary Hammer
8 ft. long Rotary Hammer attached to Hitachi Dealer's building in Creston B.C. perched 16 ft in the air. Great exposure!!!
|
|
|
|
12' Long Applicator Gun
We completed 2 - 12 ft. long chemical spraying applicators. They were used to promote the new gun at trade shows.
|
|
|
|
Mascot for Noodle Factory
6 ft. tall "Noodleman" is a mascot for noodle manufacturer.
|
|
|
|
Stargate Entrance!
With our broad ranging capabilities, we can spice up your trade show exhibit in any way imaginable!
|
|
|
|
Airplane Body
Vulcan Aviation utilized our services to produce a 1:1 scale replica of their new airplane design for wind-tunnel testing. The plane is approximately 16' long. Due to the requirements of the model for testing, the highest degree of accuracy was required and produced. This was our very first 3D theme object!
|
|
|
|
A Pair of Dice
Matching Mr. and Mrs. Dice for Pair-A-Dice RV Park in Creston BC. Dice are approximately 7' tall.
|
|
|
|
12 ft Tall Nut Man
Attention attracting, huge mascot for Bolt Supply House. One of five that we produced!
|
|
|
|
Company's Water Product Replica
8' and 5' tall water bottles for "Good For You" company.
|
|
|
|
50 trains
Chugging along as 50 of these trains where produced for a town in Kentucky as artists painted them up for charity.
|
|
|
|
Cylon Aluminium Milled Pieces
Sometimes foam just will not do for a client. These pieces are milled from aluminium shaft to achieve the highest detail required for accurate reproduction.
|
|
|
|
Florida State Medallion
4 ft. Diameter Florida State Medallion pattern for concrete reverse mold.
|
|
|
|
Screwdriver
This company wanted to WOW their customers. This 8 ft. screwdriver certainly got the attention it's owners where looking for.
|
|
|
|
Corporate Sign - Good For You Corp
Enlarged company logo made for over water dispensing unit.
|
|
|
|
Basketball Player
This life size guy was produced as a display to promote a new toy line.
|
|
|
|
Character Head
This character was produced for a client as a feature item in a trade show display. This is the body which goes with the head to the left. Client wanted both pieced milled separately.
|
|
|
|
|
Pyramid Building Supplies Sign
Our local hardware store wanted an eye-catching sign. These logs have a 36” diameter and the sign is 35 ft. tall to the roof top and 13 ft. across. The digital component of this sign was the main reason for doing this, they wanted a new and innovative way to advertise to the public who where driving by on a daily basis. We where very blessed that the client was extremely happy with it and they should be – it’s a beautiful piece of work.
|
|
|
|
Welcome to Sparwood Sign
These 10 ft. tall x 30 ft. long signs where built for the town of Sparwood, BC - there is one on the north and south ends of this coal mining town. This is their new image for the community.
|
|
|
|
Incredible Restaurant Sign
12' dinnerplate, 19' wingspan, 18' in the air, LED lighting, this ultimate restaurant sign will sure to grab the attention of passing motorist on a busy interstate highway.
|
|
|
|
Aluminium Sign
No, this sign is not 3D, but it does show the expanded CNC capabilities of our talented staff. This sign is 5' x 12', and constructed from aluminium! We also did a 3' x 5' one too.
|
|
|
|
Entrance Sign for Creston BC
Our CNC milling capabilities do A LOT more than just foam. This 4" thick granite slab was no problem.
|
|
|
|
Wooden Sign
This 1 1/2 ft x 3 ft long ceder sign was produced for the client for their store front.
|
|
|
|
2D Foam Carving
Made from high density foam board, this 4' x 8' sign was produced for the town of Rossland, BC.
|
|
|
|
Whitefish, Montana Float
This 28 ft. self-propelled float, was build from the ground up for the community of Whitefish, Montana. Special features include; LED lighting on side panels, working train with smoke, removable props. Props include 2 penguins, 2 yetties, stumps, fish, boat, golf balls, golf tee's, lake, golf green, huckleberries and ski lift all designed by the high school kids.
|
|
|
|
Creston Parade Float
The mountains and turning sun where produced for our local community float which is our local community pride symbol.
|
|
|
|
Gideons Float
This 5 ft. globe was produced for our local chapter of the Gideons, painted by members and attached to their float to show their impact throughout the world.
|
|
|
|
4' Diameter Golf Ball
Excellent eye-catcher for any size of golf course or mini golf course!
|
|
|
|
Mini Golf Attraction
These pictures are for a local area mini golf/motel business. Train is 28 ft. in total length and is put 10 ft. in the air. The golf ball goes up the wheel and travels down the length of the engine and out the other end onto the green. We even had to build the train tracks and rails. The tree is 20 ft. tall and the owner is hoping that a real asprey will make it's home there.
|
|
|
|
Mini Golf Atrraction
|
|
|
• Home